Monday, March 24, 2008

Teaching

I thought this was an interesting post:
http://thecadgeek.com/blog/2008/02/26/secret-to-training-engineers/

I fully agree with the idea that teaching should be relevant to your audience. During my own AutoCAD courses that I taught, a class full of TD's got a different experience than the classes I taught to stage managers.

I also thought the idea of reading lots of articles but retaining the same about of knowledge gained as the person reading half as many articles. I am not sure how true this is, but I can identify with it in some ways. Additionally, I often file away information away for future sources if they aren't relative to what I have going on at the moment. And there are definitely times when I will come back to that. It's one of the reasons that I enjoy writing this blog - it provides a path of sorts of what I have been thinking about, and articles / information that may be useful that I can then backtrack to as new information comes about.

By the way, the site also has alot of good cad info.

USITT Day 2 Take 2

While I was on the topic of John Huntington's show control session, I should have also pointed you towards his blog:
http://www.controlgeek.net/blog/

His site also features a variety of articles he has written, and a multitude of show control resources.

ZFX's Go-No Go Gauge

Check out this gauge made by ZFX. I saw it on the show flow, and its pretty useful.
http://www.zfxflying.com/nicoPress012808.pdf
http://www.zfxflying.com/inventation.html

Thinking too hard?

Check out the following article on problem solving:
http://www.newsweek.com/id/71514/page/1
I think the concept is interesting, and understandable. I will freely admit I that I think too much. Lets take traveling to USITT for instance - I will calculate the best way to go - close hotel, hotel within walking distance, hotel far enough away to need a car or cab. In Phoenix I rented a car, in Houston I got a closer hotel and walked.... But then again, this can be fun for me - and I can save some dough on top of it - which means I can buy more stuff (like books) when I get to USITT.

Yet it is important to understand the "Take the Best" process. This speeds up decision making, and often leads to satisfactory results. Also, I have read that this type of problem solving increases with skill level, and that the accuracy also increases.

Thoughts from USITT

It seemed like a lot of the people I talked to at the conference was interested in getting out of the traditional theatre. The reasons all were very similar, and not surprisingly. They centered on time and money. Student loans are costly, and after all the education (and theatre / entertainment technology is an over-educated field) you need a certain level of job to be able to pay back loans. Every theatre wants an MFA applicant – but no-one wants to pay the necessary salary, particularly for a recent grad. The jobs out there that do pay well enough to live on tend to have people in the position that aren’t going anywhere soon – but, I think in about 10 years there are going to be a wealth of great positions opening up – from all of these people retiring. Theatre used to be a place where you paid your dues, worked for practically nothing and worked your way up. Sure some went to school, and thus tended to enter in a higher position. But then more and more went to school, then you had to get an MFA to distinguish yourself. Soon, the MFA will be only the starting point. And by that point you’ve invested way too much money to take a low paying job. Thus people are looking at commercial scene shops, selling products, cruise ships, and academia so they can pay their loans. The few positions in LORT theatres that pay well they can’t get because they don’t have enough practical experience. They have paid some dues, but not in the places they historically needed to pay dues. So it’s an odd situation.

One of the things it means is that theatre is going to have to pay better to retain the best individuals in the theatre. This is something that I have already seen to a certain extent. And, truthfully, I have been able to make a decent living in theatre. Even in some of the smaller places I have worked, because often perks such as subsidized housing leave money in my pocket that wouldn’t have been otherwise. But, on the flip side, is the fact that there will always be people who are motivated by the art, who believe that the lack of pay is okay, and that are willing to make the sacrifice to pay their dues. So when you have 1 person who won’t work for x amount of money, you still have someone else who will –albeit, probably less qualified. But that also goes back to the point that every TD doesn’t have to have an MFA.

One of the things I wonder is what happens in the long run. The commercial theatre will support a lesser qualified individual in some places (selling gaff tape perhaps), and highly skilled people (creating new technology), but not the amount of people that come out. However, in 10 years, when some of the more sought out positions may open up due to people retiring (you do have to watch, the great positions open up at odd times) who will fill them – people entrenched in the current theatre scene or people who come out of the commercial scene. I could see where the people in commercial theatre may come back to enter into some of these positions – and I think it would be interesting to see what happens. Because when / if that happens, theatres will change to reflect a more commercial environment. Yet, the real problem is – how does this effect art. I have seen great art where loads of money was spent and salaries where high, and I have seen crap at the same spending level. The same can be said in the reverse. Though, this is probably a topic for a different entry!

FreeCycle

A cool group to belong to is Free Cycle - http://www.freecycle.org/.

The basic gist is that you can give away practically anything - or in turn get just about anything for free. It can be great for props. But it's also nice to get rid of useful stuff without filling a landfill.

Sunday, March 23, 2008

Good can be enough

I just read an article on Life Hacker. I often forget how many good articles are produced on that site. You can read the one I just read at:
http://www.lifehack.org/articles/productivity/getting-to-good-enough.html

Basically, the article aims to show that perfectionism isn't helpful, as the end result will not be perfect. Past a certain point increased effort leads to lessor and lessor gains. I can relate this to grad school- it wasn't enough to get an A on a test, I had to have a 100% (or more if there was extra credit available). While grad school isn't a critical situation, and putting in another hour or so of study couldn't hurt, there are many other situations where those extra hours of effort don't necessarily translate into a better product. But it can contribute to other unintended consequences (like lack of time on another project). At any rate I thought it was an interesting read.

USITT - The Pictures

Pic of the Design Exhibit


View from the top of the PQ 07 exhibit and towards the expo floor




Set Design by Donald Oenslager for Tristan Und Isolde from the Tobin Collection
Set Design by Norman Bel Geddes for AIDA from the Tobin Collection


Set design by Jo Mielziner for A Tree Grows in Brooklyn from the Tobin Collection





Model for Pericles designed by Daniel Ostling, presented as part of the PQ '07 exhibit





Another shot of the PQ '07 exhibit


The Conference Center



Design by Tony Straiges "Marquette for Boys Bathing Unit in Sunday in the Park with George. Part of the Tobin Collection




Model for Wicked designed by Eugene Lee. Part of the PQ '07 exhibit.

USITT Day 4

Sensors and Encoders
This was a good session presented in part by Loren Schreiber which covered the various types of encoders and sensors. The bulk of the time was spent on encoders. And he gave away good swag – booklets called BEI Industial Encoders for Dummies.

The last session for me was Scene Shop Structures: Commercial, Regional, Educational, with David Boevers, Joel Krause, Shannon Nickerson, and myself. David Boevers has the power point of his slides online on his blog, which you can check out here: http://cmuptm.blogspot.com/2008/03/usitt-slides.html

The session was interesting. While there was a comparioson done about how the traditional lort structure is, the opera structure where the TD is over props and paint, and then the commercial structure. The rest of the session was about CMU’s “crazy scheme” where they adapted to a commercial structure in their educational setting. It was interesting, and it made me wonder if such an experiment would be good on a larger scale. For instance, handling multiple projects in the “real world” is very common, yet academically, you may not always be in a position to handle multiple theatre assignments, or when you do they are in different positions or departments.

USITT Day 3


Simple Machines
This session went over the various simple machines – levers, pulleys, wheels and axels, and the wedge. The session coupled first presenters with more experienced panelist which created a good opportunity for students to get involved.
Each pair demonstrated how the simple machines worked, provided a few examples and the math involved.

ETCP Rigging Certification Information Session. This session discussed who the certification was aimed toward (the top third), and how to apply. They also took audience questions.

Postering Session. Here 4 different individuals presented “posters” regarding information they had been researching. One was about the plastic PETG – PolyEthelene Terephtalate Glygol, Copolyester sold under the brand names Vivak and Spectar. It’s available in .20 to .236” thick sheets and runs about $34.00 for 1/16” thick sheet. The samples passed out were pretty durable. The cool thing about this plastic was that it could be used for vacuum-form.
Another topic was presented by C. Randell Newton about the Physics of Water regarding creating pools on stage.
The third was presented by Heather Hillhouse-Deans which was about simple projects for teaching Lathe work.
The forth was about TTR – Technical training on the Road. This is a 4 hour workshop that can be taken to colleges and high schools. It comes in two varieties- a pneumatics and a motors and drives workshop. It sounds like a great program and will allow a variety of people to work with valves and motors and cylinders and such without having the equipment on hand, or under the pressure of a production. Secondly, I think it’s a great way to create a learning environment. It reminds me of a portable station like can be found here:
http://www.amatrol.com/Products/Automation_Systems.htm.
I really believe that innovative classroom hands-on learning is necessary for learning automation in particular, and helpful for classes such as rigging.